How to clean the welding roller frame?
Welding roller frame is often used in our industrial production, but it is also easy to get dirty, especially the bottom of the frame, which is difficult to clean. The following intelligent product series will show you how to clean the bottom of the drum structure, clean the bottom of the drum structure? The cleaning of roller frame needs specialcleaning agent.
Before cleaning, remove the other disassembled parts of support wheel and tube wheel; put the disassembled parts into the container, and add professional detergent and water in the ratio of 1:5 to facilitate cleaning and pay attention to immersion. Do not soak for too long;use a clean cloth dipped in 1:5 mixed detergent to scrub all drum structures, and then clean and remove external stains.
After cleaning all parts, wipe with a dry cloth, and then pour in the original protective agent to wipe the surface of the roller structure; only disassemble all disassembled equipment. Daily maintenance of roller frame? In order to ensure the quality, ensure the function of the equipment and extend the service life,check the appearance of the drum structure before use.
Check the smoothness of all transmissions regularly. In the process of smoothness and operation, avoid foreign matters, close the switch to start the motor test operation, investigate whether the parts are in normal operation, and ensure that there is no problem before operation. In the process of installation,the height and longitudinal direction of driving wheel and driven wheel frame shall be consistent. If not placed properly, the weldment will shift during rotation.
This article comes from the manual welding equipment of water tankhttp://www.santacatalinainn.com
-
12-20
Methods to reduce welding deformation and control
I. causes and types of welding deformation causes of welding deformation: welding deformation refers to the deformation of weldments during and after welding. During welding, the molten metal and the base metal near the seam expand and produce plastic deformation. During solidification, the weld and the metal near the seam contract. This is the longitudinal stress and the transverse stress. Make the weld longitudinal and transverse shrinkage, so that the weldment deformation. Because the heat e
-
12-20
Specific differences between grinding machine and polishing machine
Difference: the workpiece processed by grinding machine is rough, and the surface finish of workpiece processed by polishing machine is better, but high finish can be achieved by installing precise grinding wheel on grinding machine. Grinding machine: electric grinder reciprocating electric polishing grinder (also known as file mill). It is widely used in the fine machining and surface polishing of the mold profession. It is a substitute for similar pneumatic products. The main outstanding featu
-
12-20
How to improve the efficiency of straight seam welding machine?
The straight seam welding machine is widely used in ordinary times, and our appeal to the seam welding machine is constantly strengthened. We should know about the operation of the seam welding machine. The straight seam welding machine is not only excellent in spot welding machine, but also excellent in seam welding machine. A good machine must be equipped with a good operator. It is not simple to be a good operator. In addition to the accumulation of time experience, it also needs many tips, s
-
12-20
How to deal with the failure of welding robot?
General welding robot factory has the following shortcomings: a) human shortcomings caused by improper operation, mainly including welding gun damage in welding robot factory, improper loading and unloading of workpieces, and no deformation of positioner follow-up. B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device. C) improper environmental protection